Blue Boar 1-3/4" (45mm) Stucco-Wood & FRP / fiberglass Tungsten Carbide Tipped TCT Hole Saw with 7/16" shank (M16 Thread), 5/16" (8mm) carbide pilot bit, and ejection spring

Blue Boar 1-3/4" (45mm) Stucco-Wood & FRP / fiberglass Tungsten Carbide Tipped TCT Hole Saw with 7/16" shank (M16 Thread), 5/16" (8mm) carbide pilot bit, and ejection spring Reviews

Other Picture

Blue Boar 1-3/4" (45mm) Stucco-Wood & FRP / fiberglass Tungsten Carbide Tipped TCT Hole Saw with 7/16" shank (M16 Thread), 5/16" (8mm) carbide pilot bit, and ejection spring Feature

• Single bit is engineered to bore holes in both wood and masonry
• Hard and durable RA90 TCT tungsten carbide tipped cutting teeth
• 2" cutting depth for thick stucco, metal siding
• Ejection spring for easy removal of the cut plug
• Works with any ½" corded or cordless hand drill

Designed for rapid cutting and fast plug removal of holes in masonry and wood and composite materials. The new Blue Boar Tungsten Carbide Tipped TCT hole cutter quickly bore holes in stucco, plaster and lath, plywood sheathing, clay pipe, Hardie cement board, wood, non ferrous materials, aluminum siding, hard or composite plastic. Engineered with a unique tooth design and using premium grade tungsten carbide tips, the hole cutters are able to withstand the demands of cutting through masonry while maintaining a cutting edge that cuts effectively through hard and soft wood, plywood, OSB, and chipboard. The extra deep 2" cutting depth is great for thick multilayer surfaces such as stucco over OSB or thick plaster over wood. The thread mounting of the cutter head on the 4" shaft enables the tool to withstand hard use in the toughest materials for hole after hole. Use with any ½" corded or cordless drill (hammer drills OK if hammer action is turned off). Includes TCT hole cutter, 4" shaft, 8mm carbide tipped masonry bit, ejector spring, hex wrench, and sturdy plastic storage tube.

Visit Store Now !!

Detail Products

Detail Reviews

OLSON ALL PRO 70-1/2" X 3/16" WIDE - 10 TEETH PER INCH BAND SAW BLADE

OLSON ALL PRO 70-1/2" X 3/16" WIDE - 10 TEETH PER INCH BAND SAW BLADE Reviews

Other Picture

OLSON ALL PRO 70-1/2" X 3/16" WIDE - 10 TEETH PER INCH BAND SAW BLADE Feature

• 3/16" wide - .025" thick, 10TPI, Reg Tooth Style - Raker Set.
• Fits Sears Craftsman, 10" Tilting Head Band Saw Model #21400
• Tooth hardness: 64-66 Rc with Back Hardness 40-50 Rc.
• For cutting hard, soft, exotic hardwoods, plastic or mild steel.
• Tension-tested for strength & quality assurance. Made in USA.

Superior blades, affordable prices! Low-tensioned, milled blades are the premium choice of commercial users & professionals. Unlike flex back bands, All Pro features a hard back that can travel up to 5,000 SFM. Exclusive material (steel enriched with tungsten chrome & silicon, plus pinpoint carbides) offer strength & durability. Made in USA by Olson Saw Company.

Visit Store Now !!

Detail Products

• OLSON ALL PRO 70-1/2" X 1/4" WIDE - 6 TEETH PER INCH BAND SAW BLADE
• OLSON ALL PRO 70-1/2" X 1/8" WIDE - 10 TEETH PER INCH BAND SAW BLADE

Detail Reviews

CMT 310.080.12 8mm Drill Bits for CMT333 Hinge Boring System

CMT 310.080.12 8mm Drill Bits for CMT333 Hinge Boring System Reviews

Other Picture

CMT 310.080.12 8mm Drill Bits for CMT333 Hinge Boring System Feature

• 10mm shank
• Carbide Tipped
• PTFE Coating
• Micrograin Carbide

(1) 2 fluted Dowel drill bit. It has two cutting edges. 8mm cutting diameter x 27mm cutting length, OAL 57.5mm, Left hand rotation10mm shankCarbide TippedPTFE CoatingMicrograin Carbide

Visit Store Now !!

Detail Products

• CMT CMT333-03 Universal Hinge Boring System
• CMT 317.350.11 35mm Boring Bit for CMT333-03 Hinge Boring System
• Freud CB35057R Industrial Carbide Tipped Cylinder (Hinge) Boring Bits Right Hand 35mm Diameter -10mm Shank - 57.5mm Length

Detail Reviews

ALL-PRO BLADE-80 X 3/8 x 4TPI SKIP

ALL-PRO BLADE-80 X 3/8 x 4TPI SKIP Reviews

Other Picture

ALL-PRO BLADE-80 X 3/8 x 4TPI SKIP Feature

• Made from special high alloy tool steel combined with pinpoint carbides.
• Also, molybdenum, silicon and chrome to enhance performance and blade longevity.
• Redesigned to improve chip evacuation, cutting speed, and smoothness.
• Longer lasting, more durable and controllable than standard carbon blades.
• All Pro blades cut hard and soft woods, plastic, mild steel and non ferrous metals.

The All Pro professional blades are made from special high alloy tool steel combined with pinpoint carbides, molybdenum, silicon and chrome to enhance performance and blade longevity. The teeth are extra hard 64-66Rc and were redesigned to improve chip evacuation, cutting speed, and to provide a surface requiring less sanding. These premium blades are longer lasting, more durable and controllable than standard carbon blades. Tough and shock resistant, use these blades for your more difficult operations. Use the All Pro blades to cut hard and soft woods, plastic, mild steel and non ferrous metals.

Visit Store Now !!

Detail Products

• ALL-PRO BLADE-80 X 1/2 x 3TPI HOOK
• OLSON ALL PRO 80" X 1/8" WIDE - 14 TEETH PER INCH BAND SAW BLADE
• URETHANE BAND SAW TIRES 7/8" WIDE BY 12" DIAMETER

Detail Reviews

Makita 733126-5A Router Bit, 3/16-Inch Slot Cutter, 3 Flute, 1/4-Inch SH, C.T.

Makita 733126-5A Router Bit, 3/16-Inch Slot Cutter, 3 Flute, 1/4-Inch SH, C.T. Reviews

Other Picture

Makita 733126-5A Router Bit, 3/16-Inch Slot Cutter, 3 Flute, 1/4-Inch SH, C.T. Feature

• 1-7/8-Inch radius
• Carbide tipped
• Ball bearing pilot
• 2 1/8-Inch overall length
• Replacement bearing is 733132-7A

1/2-Inch depth of cut. Smooth cutting slotting bit for weather stripping, T molding and splining.1-7/8-Inch radiusCarbide tippedBall bearing pilot2 1/8-Inch overall lengthReplacement bearing is 733132-7A

Visit Store Now !!

Detail Products

Detail Reviews

Irwin 93007ZR No. 2 Phillips Power Bit (Pack of 10)

Irwin 93007ZR No. 2 Phillips Power Bit (Pack of 10) Reviews

Other Picture

Irwin 93007ZR No. 2 Phillips Power Bit (Pack of 10) Feature

• Used in high torque power tools
• Designed for use in power drill chuck and chuck adapter

1 15 16'' No. 2 Phillips power bits. Extra hard power bits are fully hardened and tempered for long life under constant heavy duty use. Universal 1 4'' hex shank with power groove.

Visit Store Now !!

Detail Products

Detail Reviews

Vermont American 10220 5/16-Inch HSS Jobber Drill Bit

Vermont American 10220 5/16-Inch HSS Jobber Drill Bit Reviews

Other Picture

Vermont American 10220 5/16-Inch HSS Jobber Drill Bit Feature

• For drilling in wood, metal and plastic. Each high speed steel bit is hardened and tempered for long life and high performance in tough applications
• 118 Degree point configuration is ideal for general purpose drilling applications
• 3/8-Inch reduced shank allows for drilling larger holes with 3/8-Inch drills

5/16" x 4-1/2" High Speed Steel Jobber Drill Bit, 3-3/16" Flute Length.

Visit Store Now !!

Detail Products

Detail Reviews

Milwaukee 48-25-2561 2-9/16-Inch Selfeed Bit with 7/16-Inch Hex Shank

Milwaukee 48-25-2561 2-9/16-Inch Selfeed Bit with 7/16-Inch Hex Shank Reviews

Other Picture

Milwaukee 48-25-2561 2-9/16-Inch Selfeed Bit with 7/16-Inch Hex Shank Feature

• Self-feed bits ideal for large-hole drilling
• Features inside cutting plane for shaving clean smooth holes without pressure
• Offers effortless cutting in gummy wood
• Cutting edges can be resharpened for multiple uses
• Includes 2 starter screws

The Milwaukee 48-25-2561 2-9/16-Inch Selfeed Bit are ideal for large hole drilling in wood. The inside cutting plane shaves the hole radius for clean smooth holes without pressure, while a removable, replaceable feed screw draws the bit into the gummiest of woods effortlessly. A hex shank provides a secure gripping surface for the drill chuck. This bit measures 2-9/16 inches in diameter and is coated with a rust inhibitor. Two feed screws are included. The Milwaukee 48-25-2561 is a 2-9/16-Inch Selfeed Drill Bit.   Features: Self-feed bits ideal for large-hole drilling Features inside cutting plane for shaving clean smooth holes without pressure Offers effortless cutting in gummy wood Cutting edges can be resharpened for multiple uses Includes 2 starter screws What's In the Box: Milwaukee 48-25-2561 2-9/16-Inch Selfeed Drill Bit

Visit Store Now !!

Detail Products

• Milwaukee 48-25-2121 2-1/8-Inch Bit with 7/16-Inch Shank Selfeed Bit
• Milwaukee 48-28-4006 12-Inch Hex Shank Extensions for Selfeed Bits, Auger Bits and Hole Saws Over 1
• Milwaukee 48-28-4016 24-Inch Hex Shank Extensions for Selfeed Bits, Auger Bits and Hole Saws Over 1
• Milwaukee 48-28-1030 5-1/2-by-7/16-Inch Universal Quik-Lok Extension
• Milwaukee 48-28-4001 5-1/2-Inch Hex Shank Extensions for Selfeed Bits, Auger Bits and Hole Saws Over 1

Detail Reviews

MAXCRAFT 60605 Precision Screwdriver and Bit Set, 17-Piece

MAXCRAFT 60605 Precision Screwdriver and Bit Set, 17-Piece Reviews

Other Picture

MAXCRAFT 60605 Precision Screwdriver and Bit Set, 17-Piece Feature

• Rugged Impact-Resistant Ratchet Driver Handle
• Three Drive Positions: Forward, Reverse, and Fixed
• Free Spinning End Cap for Extra Driving Speed
• Precision-Machined Chrome Vanadium Steel (8660) Bits with Sandblasted Finish
• Bits Store Conveniently in Driver Handle

Rugged impact-resistant ratchet driver handle. 3-Drive positions: forward, reverse, and fixed. Free spinning end cap for extra driving speed. Precision-machined chrome vanadium steel (8660) bits with sandblasted finish. Bits store conveniently in driver handle. 16-piece 1-1/8-inch Precision Screwdriver Bits: 3-piece Flat: 2, 2.5, 3mm, 3-piece Phillips: #00, #0, #1, 2-piece Pozi: #00, #0, 5-piece Star: T6,T7,T8,T9,T10, 3-piece Hex: 1.5, 2, 2.5mm. 1-piece Organizer storage case.

Visit Store Now !!

Detail Products

Detail Reviews

Irwin Tools 4935705 12-Inch Speedbor Lock N' Load Quick Change Bit Holder

Irwin Tools 4935705 12-Inch Speedbor Lock N' Load Quick Change Bit Holder Reviews

Other Picture

Irwin Tools 4935705 12-Inch Speedbor Lock N' Load Quick Change Bit Holder Feature

• Carbon steel construction sleeve and body for durability and life
• Designed for one-handed quick release
• The patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits
• The 1/4-Inch quick change range now holds insert bits and uses magnets for holding the bits
• Used for Spade Bits, Fastener Drive, Speedbor Max, Small Size Unibits

Lock N Load. Recommended for all 1 4" grooved hex shank drill and spade bits requiring extra reach. 1 4" shank. Slide back sleeve to release. Internal hex drive eliminates slippage. Simply load product in chuck until product locks. Follows 11 16" and larg

Visit Store Now !!

Detail Products

• Irwin Industrial Tools 3041006 Speedbor Max Spade Bit Set, 6-Piece
• Irwin Tools 4935704 6-Inch Speedbor Lock N' Load Quick Change Bit Holder
• Irwin Industrial Tools 341008 Speebor Blue Groove Pro Spade Bit Set with Case, 8-Piece
• IRWIN 3057034 34-Piece Fastener Drive Tool Bit Set
• SE 3 Pc. Power Extension Socket Bits for Drills

Detail Reviews

1/2" Shank, 1/4" Radius x 1" Diameter x 1/2" Cutting Length - Cove Bit, Whiteside# 1803

1/2" Shank, 1/4" Radius x 1" Diameter x 1/2" Cutting Length - Cove Bit, Whiteside# 1803 Reviews

Other Picture

1/2" Shank, 1/4" Radius x 1" Diameter x 1/2" Cutting Length - Cove Bit, Whiteside# 1803 Feature

• Two flutes with bearing
• Used for decorative edging
• Made in the U.S.A.

Whiteside Machine Company has been making top quality router bits since 1970. Using the latest technology, up-to-date machinery, and expert craftsmen, they make a bit that features thick, high grade carbide, accurately ground to produce the smoothest finish cuts on your work. Each bit is inspected after every manufacturing step to ensure satisfaction and consistent quality. This cove bit is used for decorative edging with an inverted radius.

Visit Store Now !!

Detail Products

Detail Reviews

Craftics Plas-Drill Bit 7/16

Craftics Plas-Drill Bit 7/16 Reviews

Other Picture

Craftics Plas-Drill Bit 7/16 Feature

• No chipping
• No cracking
• No grabbing
• No melting

Craftics 7/16" Plas-Drill Bit These drill bits for plastic Produce clean, chip-free holes in acrylic and other plastics excellent for hand drills. 90 degree point 0 degree rack.

Visit Store Now !!

Detail Products

• Craftics Plas-Drill Bit 5/16
• Craftics Plas-Drill Bit 1/8
• Craftics Plas-Drill Bit 3/16
• Craftics Plas-Drill Bit 5/32

Detail Reviews

LS Starrett 55144/A4 Arbor with HS Pilot Drill 3/8 Chuck 9/16-1-3/16

LS Starrett 55144/A4 Arbor with HS Pilot Drill 3/8 Chuck 9/16-1-3/16 Reviews

Other Picture

LS Starrett 55144/A4 Arbor with HS Pilot Drill 3/8 Chuck 9/16-1-3/16 Feature

• Type - Arbor
• Wt. - 0.15 lb

With 1/4 high speed steel pilot drill. Set-screw in the body allows easy pilot drill replacement. Supplied with flats to fit a 5/8 wrench.

Visit Store Now !!

Detail Products

Detail Reviews